+38 (048) 740 70 47 For calls from the UA Submit request

en ua ru Pl

Українська версія сайту

Ви завжди зможете переключити мову сайту, скориставшись перемикачем.

Scientific-industrial corporation

AGRO-SIMO-MASHBUD

company with limited responsibility

Menu

Drum sieve ПБ-50

Drum Sieve ПБ-50. By pre-cleaning, the drum sieve removes coarse objects from grain. It protects downstream equipment transporting devices. It is designed for cleaning terminals, elevators, reception areas, and processing plants for grain.

Purpose:

Drum Sieve ПБ-50. By pre-cleaning, the drum sieve removes coarse objects from grain. It protects downstream equipment transporting devices. It is designed for cleaning terminals, elevators, reception areas, and processing plants for grain.

The machine made according to 3rd category of State Standard (No 15150, climatic execution "У") for domestic market and export to temperate countries. Drum Sieve should operate in working terms at the temperature from -10 °С to +40 °С. Relative humidity should be 80 % if average annual temperature is +15 °С and atmosphere pressure is 650 - 800 mmHg (86,6 – 106,7 kPa).

Specifications:

Parameter ПБ-50
1. Technical productivity, t/h (for wheat of humidity up to 15% and density of 770-850 kg/m2): 50
2. Installed capacity kW, max 0,75
3. Technological air consumption, m3/h, max 12
4. Sieve cylinder speed, С-1 or (RPM) 0,35 (22)
5. Sieve cylinder diameter, mm 700
6. Sieve cylinder length, mm 840
7. Machine dimensions, mm, max:
     - length 1 460
     - width 800
     - height 1 340
9. Weight, kg, max 300

Design and operation:

Drum Sieve consists of the following basic parts: body, sieve cylinder, drive, cleaning brush, receiving device.

The body made by stainless steel. It has working chamber with installed sieving drum. For racks with supporting plates mounted to the body. There are holes in the plates for mounting the sifter to the ceiling with bolts. The curved channels mounted to the wall of the body. These channels serve for mounting bearings and drive shaft.

The hole on the other wall of the body is designed to take on or take off sieving drum. The drive consists of planetary gear and chain gear. Sieving drum with horizontal axis of rotation is basic working part. It installed on drive shaft. Sieving drum consists of bottom, receiving sieve part with holes 25 х 25 mm and output part with holes 10х10 mm. Screw blade is welded onto the inner surface of the outlet part of the sieve drum. Screw blade made by steel plate and serves to accelerate the removal of impurities from the sifter.

We also recommend:

New

Screening machine ЦС-1М

The screening machine ЦС-1М is designed to control various products of grain processing. The machine consists of a bed in which there are a fast-rotating whip rotor and the slow-rotating sieve drum surrounding it. The whips are attached to the flail rotor. The mounting design allows you to change the angle of attack of the scourges along the length to regulate the residence time of the product in the working area. Go to

Drum sieve ПБ-100

By pre-cleaning, the drum sieve removes coarse objects from grain. It protects downstream equipment transporting devices. It is designed for cleaning terminals, elevators, reception areas, and processing plants for grain. Go to

Pre-cleaning grain separator СПО-80

Pre-cleaning grain separator СПО-80 is designed for preliminary cleaning the incoming grain from the impurities. The raw grain is with a moisture content of up to 35% and waste impurity content of up to 20%. Go to

Drum separator SB

Drum separator SB is universal equipment for grain and seeds cleaning owing to smooth changing of anger and speed of drum rotation. Go to

Can't make your choice?
The manager will help you:

Up