Ви завжди зможете переключити мову сайту, скориставшись перемикачем.
Scientific-industrial corporation
AGRO-SIMO-MASHBUD
company with limited responsibility
Aggregate roller mill Р6-АВМ-50 is designed to mill wheat grain for flour (premium, first and second classes). This mill is used in agro-industrial enterprises.
Aggregate roller mill Р6-АВМ-50 is designed to mill wheat grain for flour (premium, first and second classes). This mill is used in agro-industrial enterprises.
The design of the mill provides for the possibility of selection of semolina in the amount of 3-5% with a corresponding decrease in the yield of flour of higher grades.
The mill has a flexible modular structure and can be supplied in different configurations. On request, it is possible to supply an incomplete set or to complete the mill with additional units.
The principle of the mill is the sequential cleaning, double wetting and soaking of grain, grinding, sifting and separation into final products: flour of the highest, first and second classes, semolina and bran.
The mill includes a set of equipment for the preparation, grinding of grain, dosing and extraction of finished products, as well as the necessary electrical and support equipment. The movement of grain is carried out by mechanical and pneumatic transport. The movement of intermediate and final products and bran is carried out by pneumatic transport.
Basic section of mill:
Roller mill equipped with computer control panel, which performs three functions: mill control, accounting of finished products, registration of the parameters of the mill. The control system supports and provides manual and automatic modes of operation.
Assembly. Installation of the mill is carried out at the consumer enterprise by the manufacturer or under the direction of representatives of the manufacture. Assembly is carried out as per contract in the building В-IIа Class СНИП 2.1005-85" factories and buildings for grain storage and processing" in the presence of manufacturing license.
Parameter | АВМ-50 |
1. Capacity, t/day, no less than | 50 |
- Including: high class flour, % | 50-55 |
- First class flour, % | 15-15 |
- Second class flour, % | 5-8 |
2. Length of roll line, cm | 680 |
3. Sieving surface, cm2 | 72 |
4. Power supply voltage, V | 380 ± 38 |
5. Drive individual and group: total installed electric motor power, kWt (quantity of electric motors, pcs.), including: | 246 (93) |
- Reception section | 20 (17) |
- Section of grain preparation | 35 (15) |
- Soaking section | 2 (7) |
- Wetting section | 19 (10) |
- Grinding and sieving section | 86 (19) |
- Weighting and bagging station | 12 (13) |
- Bran collection station | 1 (2) |
- Section of aspiration and ventilation | 71 (10) |
6. Pneumatic pressure, MPa, no more than | 0,6 |
7. Capacity of the compressor on the suction inlet, m3/min., no less than | 0,5 |
8. The volume of the receiver compressor, m3, no less than | 0,08 |
9. Water consumption for rollers cooling, m3/hour, no more than | 0,04 |
10. Service staff, persons | 8 |
11. Dimensions in assembled, mm, not more than: | |
- Length | 30 000 |
- Width | 14 000 |
- Height | 6 500 |
12. Weight, kg, no more than | 105 500 |
13. Service time, years, no less than | 13 |
Note: If the completeness of the mill changes, the installed motor power of the aspiration and ventilation section will also change.