Roll hullers СГР-600 and СГР-400

Purpose:

Roll hullers СГР-600 and СГР-400 are designed for hulling buckwheat and millet at cereal processing facilities, small and medium size farms.

Specifications:

ROLL HULLERS are designed for hulling buckwheat and millet.

This machine consists of frame with receiver and magnetic column, where cylinder feed roll with control valve are installed. The frame central point has portative abrasive roll, diametrically to which there is installed a deck, fixed with a help of articulation linkage, which allow controlling tilt angle of deck and a gap width between the deck and roll. There are installed grain surfaces and exhaust section on output. Inside the frame there is also mounted aspiration leg for fractional separation of shuck.

Operating elements of these roll hullers are roll and deck. The roll if Ø600 mm, rotary-driven, deck is fixed. ВRotary-driven roll takes the grain and carries it to its operating area between roll and deck.

Distance between roll and deck is smaller than grain sizes, thus grain in operating area become clenched, and as a result of relative motion of roll surface a move of covers takes place. Roll hullers for hulling buckwheat and millet are characterized by different materials of roll and deck, from of operating hole, method of its size regulation, location of deck, etc.